View this email in your web browser  |  View on a mobile device
Quality Times | News and updated from the AWI Quality Certification Corporation
AWI Certification
First Quarter - March 12, 2019
  • Social Media: Avenue to Outreach
    Follow us on Facebook, LinkedIn, and Instagram where we are sharing resources and promoting fine architectural woodwork projects.  Use #QCP Quality and tag @awiqcp to be featured.
In This Issue:
Top News
•  Introducing Zach Deas, 2019 QCC Chair
•  2018 QCP Fast Facts & Stats
•  AWI QCC Launches New Website: Take a Cruise!
•  QCP Inspector, John Reininger, Retires
Standards
•  First Four New AWI Standards Released, Accessible Online
Tech Talk
•  Face to Face With Doors
QCP Outreach
•  Monthly Blog Reaches Woodworkers & Design/Build Industry
QCP on the Road
•  QCP Meets with Specifiers at CSI Retreat
QCP Learning Opportunities
•  Learn More About QCP at Events & on Social Media
QCP Resources
•  Get Help, Find Answers
AWI seal Top News
Introducing Zach Deas, 2019 QCC Chair

In January Zach Deas, president of Deas Millwork, succeeded Michael McNulty, Sr. of Millwork One as the 2019 Chair of the Quality Certification Corporation (QCC). 

The Deas Millwork president followed in his grandfather’s footsteps, embracing the construction industry when he was a young man.  Zach founded Deas Construction Inc., in 1998.  A millwork division developed within the construction company and by 2005, Deas Millwork was becoming its own brand.  When the economy bottomed out in 2008, the millwork division took advantage of its tremendous project backlog and evolved into a broad-based architectural millwork company that includes manufacturing and installing doors, windows, moldings, casework, countertops and finishings. During the evolutionary process, Zach purchased a few small companies, giving Deas Millwork growth opportunities to serve the healthcare, residential, hospitality, commercial, educational, retail, and historic markets in the Southeast and beyond. The firm currently retains about 40 employees, and Deas Millwork has been a QCP Licensee since 2009.

Zach told Quality Times that the Quality Certification Program (QCP) has been a contributing factor in the growth of his firm, helping to distinguish Deas Millwork from the competition.  “QCP differentiates us by providing credibility for our company among our clients.  The rigorous requirements dictated by QCP give clients defined expectations.”

“The QCP and the Architectural Woodwork Standards also provide us with standard operating procedures. By building everything to these standards, we have a documentable reference which we rely on. These practices help us educate our employees so they know what is expected of them and can be elevated by this standard whether or not the projects are certified,” Zach said.

Quality Times asked Zach about QCP’s opportunities going forward.  While he pointed out there are competing programs in the marketplace, “QCP differentiates itself as a ‘whole value program’ by continuing to monitor its licensees and certified projects.  The QCP is a lot more than paying an annual fee or paying to have your products tested; there is active participation in both directions—from QCP to licensees and vice versa—whether it be project reviews, plant inspections, etc.  Plus, participation for our firm involves continuous training of our employees and feedback that you cannot get from any other program.”

Continuous improvement is in the DNA of Deas Millwork.  Zach’s employees are constantly sharpening their skills and processes in order to offer their clients the highest quality millwork available.  “In my view, if you are measuring your work against standards, it is much easier to operate than without them.  QCP and the AWS give us that standard,” Zach said.  www.deasmillwork.com; http://www.Instagram.com/deasmillwork

2018 QCP Fast Facts & Stats
By Tricia Roberts, QCC Senior Director of Operations

The Quality Certification Corporation is pleased to announce that participants are maintaining their QCP License in order to pre-qualify for meeting specifications that require a QCP project certificate. 

Renewal results are in for 2018 with over 541 companies renewing: a 9.73% increase over 2017 and an 8.2% increase over 2016.  The number of projects registered in 2018 increased approximately 14% over 2017, which bodes well for a strong 2019. 

In order to obtain project certificates and/or labels, the project must be registered prior to submitting a request for certification. 
Remember, certification orders must be made at least two weeks prior to the commencement of fabrication to allow for scheduling of compliance inspections during the fabrication phase of the work.

  • Anyone can register a project (owner, design professional, general contractor, woodworker).
  • Only a QCP-licensed company may certify a project.
  • Project certification fees are five hundred dollars ($500) or one-half of one percent (½%) of the woodwork contract; whichever is greater.
  • For complete information on certifying a project, read Section 4 of the QCP Policies.


Note: The chart reflects activities through Dec. 31, 2018.
  • Register a project here
  • Order project certification here.  As stated above, this step must be completed at least two weeks prior to commencement of fabrication to avoid any program penalties or project delays.
  • Order a project inspection here.
  • For complete information on renewing your QCP License see Section 3 of the QCP Policies. If you were suspended for non-payment of the annual fee and have no other outstanding invoices, you may be reinstated without having to reapply in accordance with Section 3.1.7 of the QCP Policies.  Payment of the annual renewal fee will be required, plus a $300 late fee.  You will need your User Name and Password to renew your QCP License.

If you’re interested in joining other successful QCP-licensed firms, explore the QCP application process by contacting Roxanne Accetta at 571.222.4945 or visit our website, www.awiqcp.org, for details.  Prior to applying, be sure to read the entire QCP Policies, as your application fee is non-refundable.

AWI QCC Launches New Website: Take a Cruise!

The AWI QCP has been working with Limelight Marketing for the past 10 months and a recent  achievement is the NEW QCP Website.  The site is fresh, new and offers more accessibility to many frequently used functions.

QCP has received many requests regarding how architects and contractors can locate licensed QCP companies. The updated website has a new upper drop down menu option simply titled, “FIND A….” By clicking on that link the drop down reveals “PROJECT” for completed projects and “QCP FIRM” for licensed companies.

The new website has many additional improvements such as the coordination of keywords used throughout QCP’s different marketing channels like YouTube, Instagram, Facebook, Twitter and of course www.awiqcp.org. We've also added updated graphics and layouts to simplify access.  You can even sign up for our newsletters at the bottom right of the front page.

Check out QCP’s latest blog post here.

QCP Inspector, John Reininger, Retires
By Tricia Roberts, QCC Sr. Director of Operations

A true expert in the woodwork industry, John Reininger retired on January 1st from his six-year tenure  as a QCP Inspector.  Besides his knowledge of the Architectural Woodwork Standards and the industry, John developed, tested, and launched QCPs video inspections, which reduced travel and offered Licensees a bit more flexibility in scheduling their inspections.

We are thankful for his dedication to the QCP and wish him all the best in the next chapter of his life journey.

AWI seal Standards
First Four New AWI Standards Released, Accessible Online

The Architectural Woodwork Institute’s Standards Development Team has released the first four of the upcoming suite of standards, which became available in digital format online on Feb. 1, 2019, and take effect on March 15, 2019.

Industry professionals who have been using the Architectural Woodwork Standards, Edition 2 (2014) (AWS2) will likely notice some distinct differences in the requirements contained within the newer standards.

Differences with AWS2

Many of the most pronounced differences between the original and recrafted standards will be contained within the ANSI/AWI 0620-2018 Finish Carpentry Standard. Through a rigorous vetting process, the AWI Technical Committee has re-evaluated the requirements currently contained within the AWS2 and eliminated prescriptive requirements, where possible. The resulting document then went through the American National Standards Institute (ANSI) approval process, during which it was considered once again by industry professionals from all facets of the architectural woodwork industry.

The updated standard focuses heavily upon the structural integrity of architectural woodwork and related interior finishes, as opposed to presenting prescriptive requirements. The standard is intended to give installers, manufacturers, and suppliers a broader range of options in meeting customer demands, while maintaining the integrity of their workmanship.

Three non-ANSI primer standards, AWI 100–Submittals; AWI 200–Care & Storage; and AWI 300–Materials, also were released for review along with the ANSI/AWI 0620-2018 Finish Carpentry Standard.

Online Access

These documents have been made available for review at www.awinet.org for 45 days before taking effect on March 15, 2019. On that effective date, the new standards will supersede their respective sections of the AWS2. AWI 100–Submittals will take the place of the requirements in Section 1 of the AWS2, while AWI 200–Care & Storage will replace the requirements set forth in Section 2 of the AWS2. Section 3 of the AWS2 will be replaced by AWI 300–Materials.

The ANSI/AWI 0620-2018 Finish Carpentry Standard will take the place of the Installation portions near the end of each section of the AWS2.

Until the date on which these standards take effect, architectural woodwork industry professionals will continue to use the AWS2 to access the requirements for their projects. “Any projects bid on/after March 15 must conform to the new installation standard,” noted QCC Executive Director Randy Estabrook.

The Architectural Woodwork Institute (AWI) has produced and collaborated on the development of Standards in accordance with its mission from its founding in 1953 to the present day. www.awinet.org 

Founded in 1918, the American National Standards Institute (ANSI) is a private non-profit organization that administers and coordinates the U.S. voluntary standardization and conformity assessment system. www.ansi.org

AWI seal Tech Talk
Face to Face With Doors
By Wayne Hintz, QCP Representative

These days it is by no means common practice for a commercial project’s “millwork subcontractor” to provide and/or install interior doors.  The manufacturing of flush doors (and their stile-and-rail counterparts) has understandably become a separate, highly specialized discipline, practiced with increasing efficiency by large companies operating under an ever-narrowing spectrum of owners.

However, for a variety of reasons, woodwork companies with general product offerings may from time to time find themselves contractually obligated to provide some quantity of interior doors.  When this occurs, that company could opt to produce the doors in-house, perhaps because the number required is small.  Or, maybe a few doors are scattered within a blueprint matched area of decorative wall paneling also within the contract scope.  In this scenario, the woodworker might prefer total physical control of the veneer matching and sequencing as it transitions from the panels to the doors, rather than attempting to coordinate that critical aspect of the job with an outside source.

Whether such doors are manufactured in-house, by an out-source custom lay-up company, or by an actual door manufacturer, it is of course the contractual responsibility of the millworker to ensure that the end product conforms with architectural specifications, and any applicable line items in Section 9 (“Doors”) of the current Architectural Woodwork Standards, Edition 2 (2014) (AWS2).  Especially for those in our readership who may not be called upon frequently to provide AWI-conforming doors, we offer a few comments below (by no means comprehensive) which might offer some orientation to Section 9.  We address only flush doors with transparent finish, and focus on the aspect of the installed door which is often most important to the architect and/or owner: veneer matching, and deviation from “normal grain” which might compromise the overall appearance of the door face.

  • For every “Product” section of the AWS2 (5 through 12), there is information which is located outside of the section itself, but is, nevertheless, important to understanding all aspects comprising “conformance” of that particular product.  Sometimes, the product section will tell you exactly where you can find that additional information.  For example, in Section 9, line item 9.4.4.5  (page 255) states, “Sheet Products [used as part of a manufactured door] shall conform to the requirements established in Section 4” (“Sheet Goods”).  Even when dealing with only one species of veneer, adding all applicable line items in Section 4 appears to have considerably increased the amount of information associated with Section 9.  In particular, Section 4’s “Summary Tables of Allowable Wood Veneer Face Grade Characteristics” (pages 95-102) are formidable.  However, line Item 4.4.5.13.1 (page 94) states that “TABLES FOR STAND-ALONE DOOR FACES are in Section 9 [beginning on page 258]." Therefore, when assessing conformance of transparent finish flush door faces, pages 95-102 in Section 4 are irrelevant.  However, other line items of Section 4 may be applicable.
  • While Section 9 pointed us to some relevant information in Section 4, it did not inform us that definitions of most of the terms used in both the Section 4 and Section 9 tables begin on page 93 (Section 4), in the right-hand column.  This very convenient list of centrally located definitions does not appear prior to the Summary Tables in Section 9.  One must flip between the Summary Tables in Section 9, and any required definitions in Section 4.  One could also find these definitions in the AWS Glossary, beginning on page 490.

We conclude by highlighting one of the more conceptually challenging “allowable veneer characteristics” which appears in the Summary Tables beginning on page 258, and that is the line item titled:

“Small Conspicuous Burls & Pin Knots, Combined average number” (under the table’s “Natural Characteristics” category).  This line item addresses a situation in which there are both burls and pin knots present on a door face.  Let’s suppose that our example door is Red Oak, and measures 3/0-7/0 (21 sq. ft).  Let’s further suppose that on its face there are 4 burls and 4 pin knots grouped closely together in a corner of the door.   Using table 9-050 (Red and White Oak) on page 260, we see that for an AA Grade door face, there is 1 burl or Pin Knot allowed for every 4 sq. ft. of door face surface. NOTE: This does not mean that only one burl or knot may physically occupy any given 4 sq. ft. area of the door.  It does not concern us that the burls and knots happen to be physically close to one another.  Our task is to determine: 

  1. What is the number of 4 sq. ft. areas that can fit on a 21 sq. ft. door face? 
  2. If we averaged out the combined total number burls and pin knots over the number of 4 sq. ft. areas that can fit on a 21 sq. ft. door face, would that average exceed “1”, which according to the table is the maximum allowable?  Here is the calculation:

    21 sq. ft. divided by 4 sq. ft. = 5.25.

    8 burls and knots divided by 5.25 areas of 4 sq. ft. = 1.52.

Therefore the average number of burls and knots per 4 sq. ft. unit area is 1.52, which exceeds the 1 burl/knot allowable, and this particular aspect of our example door face is non-conforming.

AWI seal QCP Outreach
Monthly Blog Reaches Woodworkers & Design/Build Industry

Check out our recently launched blog and news section which provides design professionals and woodworkers with insights and the latest updates within the architectural woodworking industry. We'll publish new blog content each month that answers commonly asked questions, gives advice on working within specifications, and keeps you updated on the latest news.

Here is an example of a recent posting:

How significant is the effect of heat on architectural woodwork?

The effect of heat on woodwork is a hotly debated topic (we make no excuse for this pun) amongst woodworkers – and sometimes their clients. You can read our thoughts, recommendations and guidance in this recent blog post, and get more detailed information in the Architectural Woodwork Standards, Edition 2 (2014).

AWI seal QCP on the Road
QCP Meets with Specifiers at CSI Retreat

Within the construction industry specifiers are among the players with whom the Quality Certification Program engages on architectural woodwork projects. QCP attends specifier trade shows and conferences to build greater awareness of QCP and forge better relationships with them on behalf of our licensees.

QCP was represented by past QCC Board of Directors member and architect William A. Munyan at the semi-annual Master Specifiers Retreat, Jan. 31 – Feb. 1, where he promoted the Quality Certification Program (QCP).  The event was sponsored by the Construction Specifications Institute (CSI) at the Lowes Coronado Bay Resort in Coronado, Calif.

“I was privileged to have the opportunity to talk with multiple specifiers across the country about the Quality Certification Program. While some were familiar with the program, many specifiers were not. I was able to educate them as to the value of ‘risk management’ and the cost associated with the inspection process so they would not be blindsided during the VE process of outrageous numbers provided by contractor or construction managers. Several of the specifiers already knew of the new ANSI / AWI documents (standards) coming on the horizon [recently introduced] and asked intelligent questions of how the new documents could aid them and their clients,” Bill  reported.

“I have been very fortunate in going to the MSR as I have been on both sides of the table, as a specifier and as a representative of QCP, and I was able to assist them during our conversations.”

CSI's Master Specifiers Retreat is an exclusive event that brings together senior specifiers and product selection influencers from across the country for an intimate experience of focused education, group networking, and one-on-one meetings with building product manufacturer executives. Participants engage in 12 to 14 one-on-one meetings, 30 minutes each, with specifiers and product selection influencers of their choosing. Twenty-one product manufacturer organizations participated in the recent event.  QCP plans to participate at the next retreat, June 19-21 in Chicago, Ill. www.csiresources.org/msretreat

William A. Munyan, AIA, NCARB, SCIP, CSI, CDT, AWI, is principal of R&M Group-NC, PLLC, Architects.  R&M Group Architects is an architectural consulting firm specializing in the technical aspects of the profession including: Quality Assurance / Quality Control and Peer Review of Construction Documents; Building Code consulting; Specification Writing and Materials evaluation; Construction Administration and Value Engineering analysis; Existing Facility assessment; Building Envelope services; and Building Forensics and Expert Witnessing services. www.r-mgroup.com.

AWI seal QCP Learning Opportunities
Learn More About QCP at Events & on Social Media

INDUSTRY EVENTS
The Quality Certification Program will be represented at the following industry events in 2019:

AWI Spring Leadership Conference
March 31 – April 2
Bourbon Orleans Hotel
New Orleans, LA

A’19 AIA Conference on Architecture
Booth 3942
June 6 – 8
Las Vegas Convention Center
Las Vegas, NV

Master Specifiers Retreat
June 19 – 21
Swissotel Chicago
Chicago, IL

AWFS Vegas
Booth 7471
July 17 – 20
Las Vegas Convention Center
Las Vegas, NV

Arc Interiors

September 19 – 22
Fontainebleau Miami Beach
Miami Beach, FL

67th AWI Annual Convention
October 6 – 8
Providence, RI

Construct 2019 & SCIP
Booth 745
October 9 – 11
Gaylord National Resort & Convention Center
National Harbor, MD

SOCIAL MEDIA
Architectural woodwork is showcased on the following social media platforms, incorporating woodwork projects illustrated in editions of AWI’s quarterly journal, Design Solutions. See the following:

  • LinkedIn: AWI Quality Certification Program
  • Facebook: Architectural Woodwork Institute- QCP
AWI seal QCP Resources
Get Help, Find Answers

Need help with inspection preparation?  Confused about licensing?  Seeking answers to challenging aspects of the Architectural Woodwork Standards?  Turn to QCP Resources to enhance your participation in the Quality Certification Program.

Schedule an Inspection
Register a Project
Get Accredited
Contact Us
New QCP Licensees

Congratulations to the following companies that recently earned licenses from QCP. Look for nearly 550 other QCP-licensed woodworkers at www.awiqcp.org.

Bench Dogs    
Denver, PA
QCP License Date: 02/12/2019    
AWS Sections: P5, P10.1, P11.1, C10.3

CBW Cabinetry    
Newton, AL
QCP License Date: 01/07/2019    
AWS Section: P10.3

Central Cabinet Systems
Tacoma, WA
QCP License Date: 02/07/2019    
AWS Sections: P10.3, P11.1

D & R Cabinetry and Millwork, Inc.
Orlando, FL
QCP License Date: 12/10/2018    
AWS Sections: P10.3, P10E, P11.1, P11.3, P11E

D and S Millwork, Inc.
Lanham, MD
QCP License Date: 01/07/2019    
AWS Sections: P10E, P5, P10.1, P10.3

Decor Cabinets, Inc.    
Centerville, IA  
QCP License Date: 02/11/2019    
AWS Sections: P11.1, C10.3

Interiors International FZCO
Jafza, Dubai
United Arab Emirates
QCP License Date: 02/15/2019    
AWS Sections: P5, P10.1, P6.1, P6.2, P6.4, P6.5, P8.1, P8.2, P9.1, P10.2

Island Architectural Woodwork, Inc.
Ronkonkoma, NY
QCP License Date: 01/02/2019    
AWS Section: P9.1

Kay Dee Company    
Omaha, NE
QCP License Date: 01/23/2019    
AWS Sections: P5, P6.1, P6.2, P6E.1, P6E.2, P8.1, P8.2, P8.3, P10.1, P10.2, P10.3, P10E, P11.1, P11.2, P11.3, P11E, P12

Quality Millwork by Brownco, LLC
Rowlett, TX
QCP License Date: 12/11/2018    
AWS Sections: P5, P9E, P10.1, P10E, P11.1, P11.3, P12, P6.5, P10.3, P11E, P9.3

Sledgecraft, Inc.    
Murfreesboro, TN  
QCP License Date: 12/26/2018    
AWS Sections: P5, P6.1, P6.2, P6E.1, P8.1, P8E, P9.2, P9E, P10.1, P10.3, P10E, P11.1, P11.2, P11.3, P11E

Steve Ward & Associates, Inc.
Nashville, TN
QCP License Date: 12/11/2018    
AWS Sections: P6E.1, P8E, P10E, P11E,

Woodcraft Designers &  Builders, LLC    
Canton, MA
QCP License Date: 12/31/2018    
AWS Sections: P6.1, P6E.1, P11E, C10.3, C10E, P11.1


2019 AWI QCC
Board of Directors

Zach Deas
QCC Chair
Deas Millwork Company

Skip Heidler
QCC Treasurer
Heidler Hardwoods

Michael R. McNulty, Sr. 
QCC Immediate Past-chair
Millwork One, Inc.

Philip Bowers
Advanced Cabinet Systems

Rosa Cheney
Rosa D Cheney AIA, PLLC

Kurt Glauber
Robert A. M. Stern Architects, LLP

David Knochenhauer
McCarthy Holdings, Inc.

Rick Kogler
Architectural Wood
Products, Inc.

Barry Sterling
JC Millwork

Barton Ward
Montbleau & Associates

Phil Duvic*
Architectural Woodwork Institute

Randolph Estabrook
Corporate Secretary
Quality Certification Corporation

* ex officio


Forward to a Friend
Search Past Issues
AWI Quality Certification Program 46179 Westlake Drive, Potomac Falls, VA 20165
Phone: 855.345.0991 Fax: 703.229.1211 Web:www.awiqcp.org
Text-only Version  |  Safely Unsubscribe


To ensure delivery of Quality Times, please add 'QualityTimes@awiqcp.org' to your email address book or Safe Sender List. If you are still having problems receiving our communications, see our white-listing page for more details.

The Quality Certification Program is a product of the Quality Certification Corporation.
AWI Quality Certification